BASIC models are economic machines with two different equipment; Servo and Step. The operating speed is 30 m/minute in the Servo model and 15 m/minute in the Step model.

BASIC MODEL MACHINE FEATURES:  

• 3.0 Hp. 18.000 Rpm or 4.0 Hp. 18.000 spindle options
• Net cutting area dimensions 1500 x 3200 and 2000 x 4000
• Bridge height: 250mm
• Servo or step motor and drivers.
• Step model 220 V.
• Servo model 380 V.
• Vector controlled inverter
• Racks on the “X” and “Y” axes
• Ball screw on the “Z” axis
• STRONGBELT timing belt (Ireland)
• Precision guides on all axes
• Non-flammable cable channels
• High speed and licensed controls
• Fully screened Helu Kabel cables (German)
• Edge and corner profiles manufactured by extrusion
• “T” slotted, eloxal coated all aluminum table
• Operator panel fixed to the body
• Standard mist coolant tool cooling mechanism
• Corrosion protection of all parts by coating or painting

In the case of interruption of the cutting, you can start where you left off or desire. You can see the lines cut, being cut or to be cut with different colors on the simulation screen and monitor the cutting from different angles. In returning to zero, the bridge controls its miter. The axes may move step by step, slow and fast. When you import the project, you can see the cutting length, total cutting area and total cutting time. The remaining cutting time can be displayed on the process bar analogously. You can move the machine to any desired point at a desired speed by entering a numerical value.