Our laser cutting machines are manufactured at two different dimensions; 1350 x 2500 and 1500 x 3000.The laser unit is moved over the bridge. It has two different equipment options; Step and Servo.

80W, 100W or 135W tubes are used according to the customer’s request or work.

LASER MACHINE FEATURES:

• Step or servo motor and drivers
• Double motor and ball screw or belt drive on the “Y” axis
• Timing gear and belt on the “X” axis
• Ball circulation guides
• Non-flammable cable channels
• High-speed, licensed controls
• Fully screened Helu Kabel cables (German)
• Corrosion protection of all parts by coating or painting
• Water cooling mechanism
• Gas absorption mechanism
• Shifting ramp for materials falling into the machine
• Stripe or square honeycomb table options.

  CERTAIN SOFTWARE FEATURES: 

• Monitoring the project from 4 different angles on the screen
• Changing the cutting speed and laser power during cutting
• Opening and closing the cooling liquid, gas absorption and compressed air automatically
• Assigning different power values for different screen line colors

In the case of interruption of the cutting operation, you can start where you left off or desire. You can see the lines cut, being cut or to be cut with different colors on the simulation screen and monitor the cutting from different angles. In returning to zero, the bridge controls its miter. The axes may move step by step, slow and fast. When you import the project, you can see the cutting length, total cutting area and total cutting time. The remaining cutting time can be displayed on the process bar analogously. You can move the machine to any desired point at a desired speed by entering a numerical value